|
ERSA DIGITAL 2000 A with X-Tool
The ERSA DIGITAL 2000 A is an intelligent, microprocessor controlled
soldering station. Outstanding flexibility and multi-functionality sets
this system apart from others. The ERSA DIGITAL 2000 A is fully
antistatic according to MIL-SPEC/ESA standards and has a potential
equalization jack with a high-resistance connection to the soldering or
desoldering tip.
The following tools can be operated with this station: soldering irons
Tech tool, Micro tool, Power tool, Pincette 40 desoldering tweezers and
X-Tool desoldering iron. The soldering station automatically identifies
the tools when they are connected and adjusts automatically according to
the tool's requirements.
Apart from multi-functionality, simple and comfortable operation is
another highlight of the station.
Further features are: set value adjust-ment, the possibility to select °C
or °F on the temperature unit, selection of a stand-by period between 0 -
60 minutes, offset and calibrating function, as well as the possibility
to block any adjustments by a 3-digit pass word. The station's heating
system can be adjusted to the corresponding application with the help of
the integrated "Energy Function".
To increase user-friendliness, the soldering station also includes 4
programs. Each program can be configurated independently and differently
with the above mentioned functions. Each soldering iron has its own
program, and when the tools are changed, the soldering station
automatically switches to the corresponding program. Consequently, the
DIGITAL 2000 A is perfectly suited for operation with the Tool Selector.
If only one soldering iron is required, all programs are available for
this iron.
The temperature is controlled by a digital PID algorithm, optimized for
precise and quick temperature contro
The compressor unit 0CU103A is equipped with a powerful vacuum /
compressor aggregate, which makes the station independent from external
compressed air connection. .
The ERSA X-Tool is a high-tech tool to desolder wired components from
one-sided, two-sided or multilayer circuit boards. In order to prevent
any damage to the circuit boards or components, the high performance of
the X-tool 120 W (preheating power 260 W) guarantees efficient
desoldering with an ideal dwell time even under maximum load lasting over
an extended period. The heat energy stored in the solder tip; the
powerful heating elements in conjunction with an extraordinarily
proficient heat transfer owing to outstanding structural qualities of the
removeable desoldring tip; and the presence of a temperature sensor very
close to the desoldering tip - all these combine to ensure peak
performance at all times.
The desoldering station 0DIG20AVU consists of electronic station 0DIG203A
with mains cable 3K120KR053075, compressor unit 0CU103A, desoldering iron
ERSA X-Tool with desoldering tip 0722EN1223 and tool holder 0A44.
|
